Main content


2020 LS XP8084 Loader

All the power you need, to tackle just about any project you want. Don’t let anything stand in your way. With these heavy-duty utility tractors, you get more—power, performance, standard features, the works. So you can do more—acre after acre, year after year. Up the ante on smart design and powerful performance so you can tackle any job you face.





Spec Value
Type 4-cylinder, CRDI, Water-cooled
Engine Model (Tier 4) F5G
Emission Tier 4 Final
Engine HP (Gross) 84.5
PTO HP 71.8
Rated Speed (RPM 2,200
Displacement (cu in.) 206.7
Fuel Tank Capacity (gal) 30.4
Spec Value
Transmission Synchro Shuttle
No. of Speeds 20 x 20
Forward Speed (mph) 0.1 ~ 20.8
Spec Value
Type Independent / Ground Speed PTO
Rear (rpm) 540/750/1,000
Spec Value
Control System Position / Draft
Implement pump (gpm) 15.7
Steering pump (gpm) 6.5
Total flow (gpm) 22.2
Category, 3 pt hitch Category 2
Hitch Lift capacity (lb.) 7,275
Remote Ports 2 Pairs (Front), 3 Pairs (Rear)
Spec Value
Overall Length, Frame to Link (in.) 152.2
Wheelbase (in.) 90
Overall Width with Tires (in.) 78.8
Height to top (in.) 106.3
Spec Value
Front 12.4 – 24
Rear 18.4 – 34
Spec Value
Total weight without ballast (lb.) 7,525
Spec Value
Bucket Size (in.) 83
Maximum Lift Height (in.) 139.9
Clearance with Attachment Dump (in.) 103.3
Reach at Maximum Height (in.) 23.4
Maximum Dump Angle (deg.) 57
Maximum Rollback Angle (deg.) 46
Digging Depth (in.) 4.6
Overall Height in Carry Position (in.) 68.8
Lift Capacity (@ Pivot Pin) (lbs.) 5,139
Breakout Force (@ Pivot pin) (lbs.) 5,313
Approx. Weight (Loader w/o Bucket) (lbs.) 1,660


More Features Come Standard

  • Roomy Cab with AC/Heat: Comes standard with side mirrors, front washer/wiper, interior lighting, air conditioning and heat, flat platform and rubber mat.
  • Independent PTO: Easiest PTO to operate that can be turned on or off with a switch. Standard 540, 750, 1,000 RPM and shiftable ground speed PTO.
  • 4WD (Front Wheel Mechanical Assist): Go from 2WD to 4WD with a simple push of a switch.
  • Extendable Lower Links: With secondary Hydraulic Cylinder allows easier attachment of a wide variety of Category 2 implements with a 8,378 lb lift capacity.
  • STANDARD FULLY SYNCHRONIZED TRANSMISSION & 40×40 POWER SHUTTLE: Change gears without having to stop. 40 forward / 40 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application. Includes creeper speed and hi/low button.
  • Standard 3 Sets of Remote Valves with Detent: Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.
  • Standard Tilt & Power Steering: Makes turning easier, improves control and reduces fatigue.
  • Fender Mounted Joystick for Front End Loader: Easily accessible for maximum comfort and convenience.
  • 3-Point Hitch with Hydraulic Auto-Lift, Draft & Position Control: Most convenient way to operate your 3-Point Hitch.
  • Standard Rear Work Light: Adjustable light to improve visibility where you need it.
  • Standard Draw Bar: Increases the usefulness of the tractor without the additional optional cost.
  • 7 Pin Connector: Provides electrical power for implements when needed.
  • Large Fuel Tank: 30.4 gallon capacity provides long operation times.
  • Tier 4 Engine: Eco friendly TIER 4 engine provides more horsepower with less fuel consumption and emissions. The pre-heat starting aid helps starting the engine all the way down to -4F.
  • Easy Open One-Piece Hood: Provides accessibility for easy maintenance.
  • Premium Seat: The air suspension provides a comfortable ride. Swivel the seat up to 20 degrees to reduce the strain when looking rearward.
  • Modern Ergonomic Design: Ergonomically designed for comfort.

More Options

  • Rear Weight Kit – 99 lbs x 4
  • Front Weight Kit – 88 lbs. x 8
  • Beacon lamp
  • Mud guards

Sign up for Riggs Cat Emails

  • This field is for validation purposes and should be left unchanged.