Main content
Caterpillar
Cat C32 Auxiliary / Diesel Electric Propulsion Engine (US EPA Tier 4 / IMO III)
Cat C32 Auxiliary / Diesel Electric Propulsion Engine (US EPA Tier 4 / IMO III)
Media
Photos
Details
Specifications
Power Rating
| Spec | Value |
|---|---|
| Minimum Rating | 400 BHP 298 bkW |
| Maximum Rating | 1333 BHP 994 bkW |
Engine Specifications
| Spec | Value |
|---|---|
| Aspiration | Turbocharged-aftercooled Turbocharged-aftercooled |
| Rotation | Counterclockwise from flywheel end Counterclockwise from flywheel end |
| Bore | 5.71 in 145 mm |
| Configuration | Vee 12, 4-stroke-cycle diesel Vee 12, 4-stroke-cycle diesel |
| Stroke | 6.38 in 162 mm |
| Displacement | 1959 in³ 32.1 l |
| Emissions | U.S. EPA Tier 4 Final certified, IMO III emissions certified (SCR required) U.S. EPA Tier 4 Final certified, IMO III emissions certified (SCR required) |
| Oil Change Interval | 750 hrs - deep pan 750 hrs - deep pan |
| Rated Engine Speed | 1800 rpm 1800 rpm |
| Governor | Electronic (A5 ECM) Electronic (A5 ECM) |
| Refill Capacity | Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan |
| Cooling | Heat exchanger or keel cooled Heat exchanger or keel cooled |
| Flywheel Housing | SAE No. 0 with SAE No. 18 flywheel (136 teeth) SAE No. 0 with SAE No. 18 flywheel (136 teeth) |
Dimensions & Weights
| Spec | Value |
|---|---|
| Maximum Width | 57.3 in 1455 mm |
| Maximum Height | 63.5 in 1613 mm |
| Maximum Engine Dry Weight | 7160 lb 3248 kg |
| Minimum Engine Dry Weight | 6950 lb 3152 kg |
| Minimum Length | 83.9 in 2130 mm |
| Maximum Length | 89.8 in 2280 mm |
| Minimum Width | 57.1 in 1451 mm |
| Minimum Height | 59.3 in 1507 mm |
Clean Emissions Module (CEM) - Dimensions
| Spec | Value |
|---|---|
| 6 Brick Z-Flow – Weight | 1246 lb 565 kg |
| 6 Brick Z-Flow – Width | 43.5 in 1106 mm |
| Dosing Cabinet – Length | 37.4 in 949 mm |
| Dosing Cabinet – Width | 18.8 in 477 mm |
| 6 Brick U-Flow – Height | 23.5 in 597 mm |
| 6 Brick Z-Flow – Height | 23.5 in 597 mm |
| 6 Brick U-Flow – Weight | 1235 lb 560 kg |
| Dosing Cabinet – Weight | 209 lb 95 kg |
| 6 Brick U-Flow – Width | 56.9 in 1445 mm |
| 6 Brick Z-Flow – Length | 147.7 in 3751 mm |
| Dosing Cabinet – Height | 22.8 in 579 mm |
| 6 Brick U-Flow – Length | 85 in 2159 mm |
Standard Equipment
AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
CONTROL SYSTEM
- 24V control system
COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
- Duplex fuel filters with hybrid fuel lines
- Shipped loose primary fuel filter with water separator
- Fuel transfer and priming pump
LUBE SYSTEM
- Oil fill, simplex filter and dipstick
- Deep or shallow sump oil pan
MOUNTING SYSTEM
- Adjustable front support mounting system
GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment
ALARM AND PROTECTION
- MECP I control panel
- MECP III control panel with Cat® Alarm and Protection System
EXHAUST SYSTEM
- Water-in-fuel and exhaust temperature sensors
- Muffler
CHARGING SYSTEM
- Charging alternator
FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
LUBE SYSTEM
- Duplex oil filters
POWER TAKE-OFFS
- Front drives including stub shaft and pump drive
- Rear SAE A or B pump drives
STARTING SYSTEM
- Starting motors – air, electric or redundant