Main content
Husqvarna
2018 Husqvarna M-ZT 61
The new M-ZT series zero-turn mower from Husqvarna takes performance, productivity, and comfort to a whole new entry-commercial level. The intuitive operator interface, heavy-duty steel frame and commercial rated hydraulic system create the ultimate mowing experience. With a rugged fabricated steel deck that is mulch and collection capable, the M-ZT is practical for all of your property maintenance needs. The high back seat with armrests and adjustable ergonomic steering levers will provide a comfortable ride time after time.
Media
Photos
Details
Specifications
Capacity
Spec | Value |
---|---|
Productivity | 4.9 acres/hr |
Speed forward max | 8.5 mph |
Speed forward min | 0 mph |
Cutting deck
Spec | Value |
---|---|
Cutting width | 61 in |
Cutting deck type | Fabricated flat |
Cutting methods | Collect/Mulch/Side discharge |
Cutting deck material | Steel |
Deck thickness | 11 gauge |
Cutting height steps | 12 |
Blade engagement | Electric clutch |
Clutch rating | 200 ft. lb. |
Blades | 3 pcs |
Blade-tip speed | 18,500 fpm |
Anti-scalp wheels | 3 |
Nose roller | Yes |
Deck lifting system | Manual, foot assisted |
Powder-coated cutting deck | Yes |
Spindle/mandrel type: | Cast Iron |
Greasable mandrels | Yes |
Deck Wash Port | No |
Cutting height, min (approximate) | 1.5 in |
Cutting height, max (approximate) | 4.5 in |
Dimensions
Spec | Value |
---|---|
Base machine, length | 75.5 in |
Base machine, width (chute down) | 76 in |
Base machine, width (chute up) | 62.3 in |
Weight | 790 lbs |
Base machine, height (ROPS down) | 45.5 in |
Base machine, height (ROPS up) | 72 in |
Tire size, front width | 6 in |
Tire size, front diameter | 13 in |
Tire size, front diameter wheel | 6.5 in |
Drive system
Spec | Value |
---|---|
Transmission type | Hydrostatic |
Transmission manufacturer: | Hydro-Gear |
Transmission model | ZT 3400 |
Pump displacement | 12 cm³ |
Fan-cooled pumps | Yes |
Engine
Spec | Value |
---|---|
Motor/engine manufacturer: | Briggs & Stratton |
Engine type | Endurance Commercial |
Horsepower | 27 hp |
Cylinder displacement | 49.4 cu. in. |
Cylinders | 2 |
Engine cooling | Air |
Air filter type | Cyclone |
Power/fuel type | Gasoline |
Engine lubrication type | Full Pressure |
Oil filter | Yes |
Fuel tank volume (with reserve) | 5 gal (US) |
Fuel tank location | Side (Single) |
Equipment
Spec | Value |
---|---|
Seat material | Vinyl |
Seat spring | Yes |
Seat back height | High |
Hour meter type | Yes |
Cup holder | Yes |
Armrests | Yes |
ROPS | Yes |
Seat type | Premium |
Notes
Key Features
- Roll Over Protection System (ROPS): The practical foldable ROPS protects the user and can be lowered in areas with low-hanging branches.
- Heavy Duty Fabricated Deck: The robust cutting deck features twin 11 gauge sheet (1/4″ combined) construction for added structure and spindle support. Cast iron blade spindles, impact resistant discharge shields and reinforced scalp rollers add to the commercial duty design
- Cast Iron Spindle Housings: Bold cast iron blade housings built for durability and featuring sealed ball bearings.
- Commercial drive system: Hydro-Gear’s ZT3400 series commercial transmissions are fully serviceable and offer higher ground speeds with smooth performance.
Limited warranty
- Homeowner Warranty: 4 years or 750 hours (whichever occurs first)
- Commercial Warranty: 4 years or 750 hours (whichever occurs first)