Cat Generator Set Package
Main content
Cat
C13 Generator Set
Maximum Rating
400 ekW
400 ekW
Minimum Rating
320 ekW
320 ekW
Emissions/Fuel Strategy
EPA Stationary Emerg Use
EPA Stationary Emerg Use
Overview
The C13 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 320 to 400 ekW at 60 Hz, each generator set has been designed to meet ISO 8528-5 transient response requirements and built to accept 100 % rated load in one step. Our C13 generator sets are certified to Low Fuel Consumption Emissions / Fuel Strategy.
Media
Photos
360° View
Exterior
360° Exterior view. Double click on the image to zoom in on any area of the product.
Features
Cat Diesel Engine
A-Frame Alternator
GCCP 1.3 Control Panel
Cooling System
Certifications
One Safe Source
World Wide Product Support
Details
Specifications
Generator Set Specifications
| Spec | Value |
|---|---|
| Maximum Rating | 400 ekW 400 ekW |
| Minimum Rating | 320 ekW 320 ekW |
| Emissions/Fuel Strategy | EPA Stationary Emerg Use EPA Stationary Emerg Use |
| Voltage | 208 to 600 Volts 208 to 600 Volts |
| Frequency | 60 Hz 60 Hz |
| Speed | 1800 rpm 1800 rpm |
| Duty Cycle | Standby, Prime Standby, Prime |
Engine Specifications
| Spec | Value |
|---|---|
| Engine Model | C13 ACERT In-line 6, 4-cycle diesel C13 ACERT In-line 6, 4-cycle diesel |
| Bore | 5.12 in 130 mm |
| Stroke | 6.2 in 157 mm |
| Displacement | 763 in³ 12.5 B |
| Compression Ratio | 16.3:1 16.3:1 |
| Aspiration | Turbocharged Air to Air Aftercooled Turbocharged Air to Air Aftercooled |
| Fuel System | MEUI MEUI |
| Governor Type | Adem™A4 Adem™A4 |
Generator Set Dimensions
| Spec | Value |
|---|---|
| Length – Maximum | 186.7 in 4743 mm |
| Width – Maximum | 79.3 in 2014 mm |
| Height – Maximum | 84 in 2133 mm |
Standard Equipment
Air Inlet System
- Turbocharger
- Aftercooler core
- Air cleaner; light duty with disposable paper filter
Starting / Charging
- Charging alternator
- 24 Volt electric starting motor
Control Panel
- GCCP 1.3
Control System Controller
- GCCP 1.3
Cooling System
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant
- Coolant drain line with valve
- Radiator and cooling fan with guard
Certification
- EPA stationary emergency use
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use – shipped loose
Base / Fuel Tank
- Audio and visual fuel alarm
Fuel System
- Standard open set fuel tank/base supplied
- Base, formed steel with single wall integral 8-hour fuel tank
Protection
- Safety shutoff – Overspeed
- Safety shutoff – Low oil pressure
- Safety shutoff – High water temperature
Generator and Attachments
- Segregated low voltage (AC/DC) wiring panel
- Power center, IP22
- A Frame generator – IP21 Protection
- Integrated voltage regulator (IVR)
- Optional LC Frame generator – IP23 Protection
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
Governing System
- Cat electronic governor (ADEM A4)
Lube System
- Oil cooler
- Oil drain valves
- Lubricating oil
Mounting System
- Includes lifting provisions and termination points for coolant and lube oil drain lines
- Captive linear vibration isolators between base and engine-generator
Starting / Charging System
- 24V battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
European Certificates
- Global Certification for CIS
- EU Certificate of Conformance (CE)
Air Inlet System
- Single element air cleaner
- Dual element air cleaner
Circuit breakers
- Padlockable circuit breaker device
- 3 Pole (IEC-100% rated) Circuit breaker
- Shunt trip for IEC circuit breaker
- 4 Pole (IEC-100% rated) Circuit breaker – Motorised
- Circuit breaker (IEC) Auxiliary contacts
- 4 Pole (IEC-100% rated) Circuit breaker
- Power terminal strip
- 3 Pole (IEC-100% rated) Circuit breakers – Motorised
Control Panels
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- GCCP 1.4
- Volt free contacts
- Local alarm modules: Local annunciator
- Remote annunciator module
Cooling System
- Radiator duct flange
- Stone guards
- Low coolant temperature alarm
Enclosures
- Sound attenuated enclosures
- High ambient sound attenuated enclosures
Exhaust System
- Flexible 8 inch exhaust fittings
- Mufflers – End in/end out
- 10, 25 and 35 dBA attenuation
- 6 and 8 inch elbow kit
- 6 and 8 inch flange GP
Fuel System
- Fuel transfer system controls
- Manual fuel transfer pump
- Integral dual wall fuel tank base
Generator and Attachments
- LC frame generator
- LC CIP generator
- Space heaters
- Ingress protection
- A Frame oversize generator
- Permanent magnet excitation (PMG) generator
- A Frame CIP generator
Lube System
- Manual sump pump
Mounting System
- Narrow skid base
starting / Charging System
- Battery disconnect switch
- Jacket water heater
- 5 Amp single Battery charger
Related Products
Enclosures
C13 Sound Attenuated Enclosure 50 and 60 Hz
C13, C15, C18 SA enclosure. 350-600 kW 60 Hz