Cat Generator Set Package
Main content
Cat
C13 Generator Set
Maximum Rating
450 kVA
450 kVA
Minimum Rating
350 kVA
350 kVA
Emissions/Fuel Strategy
Low Fuel, R96/EUIIIa
Low Fuel, R96/EUIIIa
Overview
The C13 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 350 to 450 kVA at 50 Hz, our C13 diesel generator sets designed to ISO 8528-5 transient response requirements. These generator sets range from low fuel consumption systems EU Stage IIIA Non-road Emission Standards Emissions / Fuel Strategy.
Media
Photos
360° View
Exterior
Enclosure
Features
Cat Diesel Engine
A-Frame Alternator
GCCP 1.3 Control Panel
Cooling System
One Safe Source
Worldwide Product Support
Details
Specifications
Generator Set Specifications
| Spec | Value |
|---|---|
| Maximum Rating | 450 kVA 450 kVA |
| Minimum Rating | 350 kVA 350 kVA |
| Emissions/Fuel Strategy | Low Fuel, R96/EUIIIa Low Fuel, R96/EUIIIa |
| Voltage | 380 to 415 Volts 380 to 415 Volts |
| Frequency | 50 Hz 50 Hz |
| Speed | 1500 rpm 1500 rpm |
| Duty Cycle | Standby, Prime Standby, Prime |
Engine Specifications
| Spec | Value |
|---|---|
| Engine Model | C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
| Bore | 5.12 in 130 mm |
| Stroke | 6.18 in 157 mm |
| Displacement | 762.8 in³ 12.5 l |
| Compression Ratio | 16.3:1 16.3:1 |
| Aspiration | Air to Air Aftercooled Air to Air Aftercooled |
| Fuel System | MEUI MEUI |
| Governor Type | Adem™A4 Adem™A4 |
Generator Set Dimensions
| Spec | Value |
|---|---|
| Length – Maximum | 186.7 in 4743 mm |
| Width – Maximum | 79.3 in 2014 mm |
| Height – Maximum | 84 in 2133 mm |
Standard Equipment
Air Inlet System
- Turbocharger
- Aftercooler core
- Air cleaner; light duty with disposable paper filter
Control Panel
- GCCP 1.3
Cooling System
- Radiator and cooling fan with guard
- Caterpillar extended life coolant
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use – shipped loose
Fuel System
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
Generator and Attachments
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Optional LC Frame generator – IP23 Protection
- Integrated voltage regulator (IVR)
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- A Frame generator – IP21 Protection
Packaged Generator Set
- Coolant drain line with valve
- Disposable air filter
- Coolant level sight gauge
- Low coolant level sensor
- Radiator package mounted
- Service indicator
Governing System
- Cat electronic governor (ADEM A4)
Lube System
- Oil drain valves
- Lubricating oil
- Oil cooler
Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging System
- 24V battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
European Certificates
- Global Certification for CIS
- EU Certificate of Conformance (CE)
Air Inlet System
- Dual element air cleaner
- Single element air cleaner
Circuit breakers
- Power terminal strip
- 3 Pole (IEC-100% rated) Circuit breakers – Motorised
- Circuit breaker (IEC) Auxiliary contacts
- 4 Pole (IEC-100% rated) Circuit breaker – Motorised
- Padlockable circuit breaker device
- Shunt trip for IEC circuit breaker
- 3 Pole (IEC-100% rated) Circuit breaker
- 4 Pole (IEC-100% rated) Circuit breaker
Control Panels
- GCCP 1.4
- Volt free contacts
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- Local alarm modules: Local annunciator
- Remote annunciator module
Cooling System
- Stone guards
- Radiator duct flange
- Low coolant temperature alarm
Enclosures
- High ambient sound attenuated enclosures
- Sound attenuated enclosures
Exhaust System
- 10, 25 and 35 dBA attenuation
- Mufflers – End in/end out
- 6 and 8 inch flange GP
- 6 and 8 inch elbow kit
- Flexible 8 inch exhaust fittings
Fuel System
- Manual fuel transfer pump
- Integral dual wall fuel tank base
- Fuel transfer system controls
Generator and Attachments
- A Frame oversize generator
- Permanent magnet excitation (PMG) generator
- Ingress protection
- A Frame CIP generator
- LC frame generator
- LC CIP generator
- Space heaters
Lube System
- Manual sump pump
Mounting System
- Narrow skid base
starting / Charging System
- Battery disconnect switch
- 5 Amp single Battery charger
- Jacket water heater
Related Products
Enclosures
C13 Sound Attenuated Enclosure 50 and 60 Hz