Engine
Main content
Caterpillar
DG200-2 (3 phase)
Frequency
60 Hz
60 Hz
Natural Gas Rating
200 eKW
200 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
U.S. EPA Certified for Non-Emergency Application
Overview
The Cat® spark-ignited generator product line for stationary applications feature permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation and 2/3 pitch incorporated.
Media
Photos
Features
Generator
EMCP Control Panel
Design Criteria
UL 2200 / CSA – Optional
Worldwide Product Support
Details
Specifications
Generator Set Specifications
| Spec | Value |
|---|---|
| Frequency | 60 Hz 60 Hz |
| Natural Gas Rating | 200 eKW 200 eKW |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application U.S. EPA Certified for Non-Emergency Application |
| Displacement | 864.71 in 14.17 l |
| Fuel Type | Natural Gas Natural Gas |
| Speed | 1800 rpm 1800 rpm |
Engine Specifications
| Spec | Value |
|---|---|
| Engine Model | 14.2 L, Inline 6, 4 Cycle, Spark - Ignited 14.2 L, Inline 6, 4 Cycle, Spark - Ignited |
| Fuel System | Carburetor, Down Draft Carburetor, Down Draft |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Governor Type | Electronic Electronic |
| Compression Ratio | 9.5:1 9.5:1 |
| Bore | 5.31 in 134.87 mm |
| Stroke | 6.5 in 165.1 mm |
Generator Set Dimensions
| Spec | Value |
|---|---|
| Length | 127.95 in 3250 mm |
| Width | 52.93 in 1344.5 mm |
| Height | 67.37 in 1711.2 mm |
| Weight | 5756 lb 2610.9 kg |
Standard Equipment
Cooling
- Closed coolant recovery system
- Factory-installed radiator
- 50/50 Ethylene glycol antifreeze
- Radiator and cooling fan complete with protective guards
- Standard ambient temperatures up to 50°C (122°F)
Air Inlet
- Single element air filter
Fuel
- Primary and secondary fuel shut-off
- Low fuel pressure switch
- Fuel pressure test po
- Natural Gas or LP Vapor
- NPT connection
- Dual lock off valves
Exhaust
- Exhaust outlet with 3” pipe
Generator
- Permanent magnet excitation
- Full load capacity alternator
- Class H insulation material
- Permanent magnet excitation
- Integrated Voltage Regulator
- Matched to the performance and output characteristics of Cat engines
- Class H insulation material
- Full load capacity alternator
- IP23 Protection
Controls
- EMCP 4.2 Series generator set controller
Mounting
- Vibration isolaton (puck type)
- Rubber vibration isolators
Electric Power - Package Serial Number Prefix
- Battery charging alternator
Electric Starting and/or Prelube
- Battery cables
- Solenoid activated starter motor
- Engine electrical system
- Solenoid activated starter motor
Governor
- Electronic governor (non adjustable)
Control Panel
- EMCP 4.2 Series generator set controller
Starting/Charging
- Batteries with rack and cables
- 12 volt starting motor
Optional Equipment
Starting/Charging
- Jacket water heater
- Battery heater
- Charging alternator
- Battery charger – UL Listed 10 amp
General
- Enclosures: sound attenuated, weather protective
- Suitable for Use as Service Equipment (SUSE)
- Automatic transfer switches (ATS)
- UL 2200 package
- CSA Certification
Generator
- Thermal magnetic or electronic trip MCCBs
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM)
- Oversize and premium generators