Main content

Caterpillar

C18 ACERT Tier 4 Final

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C18 ACERT Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.

Media

Photos

C18 ACERT™ Tier 4 Final Petroleum Engine
C18 ACERT™ Tier 4 Final Petroleum Engine

Documents

Features

Emissions

Engine Design

Low Total Cost of Ownership

Advanced Digital Engine Management

Custom Packaging

Fuel & Oil

Transmissions

Product Support Offered Through Global Cat Dealer Network

Over 80 Years of Engine Manufacturing Experience

Web Site

Details

Specifications

Spec Value
Maximum Rating 800 BHP 597 bkW
Emissions U.S. EPA Non-road Tier 4 Final U.S. EPA Non-road Tier 4 Final
Displacement 1104 in³ 18.1 l
Minimum Rating 755 BHP 563 bkW
Bore 5.7 in 145 mm
Stroke 7.2 in 183 mm
Rated Speed 1800 r/min 1800 r/min
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Governor and Protection ADEM A4 ADEM A4
Engine Weight – Net Dry 3482 lb 1580 kg
Oil Change Interval 250 - 500 250 - 500
Rotation from Flywheel End Counterclockwise Counterclockwise
Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1 SAE No. 0 or SAE No. 1
Flywheel Teeth 136 (SAE 0), 113 (SAE 1) 136 (SAE 0), 113 (SAE 1)
Spec Value
Minimum Cooling System – Engine Only 7.1 gal (US) 26.9 l
Spec Value
Length 60.2 in 1530 mm
Width 37.8 in 961 mm
Height 51 in 1282 mm

Standard Equipment

Air Inlet System

  • Turbocharged Aftercooled

Control System

  • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control

Cooling System

  • Vertical outlet thermostat housing, centrifugal water pump

Exhaust System

  • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)

Flywheels and Flywheel Housing

  • SAE 0 and SAE 1 flywheel housing

Fuel System

  • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming

Lube System

  • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)

Power Take Off

  • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications

General

  • Paint: Cat yellow; vibration damper; lifting eyes

Sign up for Riggs Cat Emails

  • This field is for validation purposes and should be left unchanged.