Main content
Caterpillar
C32 ACERT Tier 2 Oilfield Diesel Generator Set
Producing oil and gas is a complex task that requires equipped designed specifically for the oilfield. Cat C-Series oilfield diesel generator sets offer a rugged design capable of withstanding harsh conditions in the oilfield. Decades of experience in engine manufacturing combined with the latest electronics deliver the highest performance, safe operation, low emissions, and simplified operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C32 ACERT oilfield diesel generator set. Ratings: 800 – 910 ekW (1000 – 1300 kVA) @ 50 and 60 Hz (1500 and 1800 rpm) meet U.S. EPA Tier 2 equivalent, EU Stage II equivalent emission standards.
Media
Photos
Details
Specifications
Engine Specifications
| Spec | Value |
|---|---|
| Maximum Rating | 800 ekW (1000 kVA) 800 ekW (1000 kVA) |
| Minimum Rating | 910 ekW (1300 kVA) 910 ekW (1300 kVA) |
| Emissions/Fuel Strategy | U.S. EPA Tier 2 U.S. EPA Tier 2 |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Manifold Type | Dry Dry |
| Bore | 5.7 in 145 mm |
| Stroke | 6.4 in 162 mm |
| Displacement | 1959 in³ 32.1 l |
| Engine Control and Protection | ADEM A4 ADEM A4 |
| Generator Set Control | EMCP 3.1 EMCP 3.1 |
| Generator | SR4B SR4B |
| Fuel System | MEUI MEUI |
| Frequency – Speed | 50/60 Hz (1500/1800 rpm) 50/60 Hz (1500/1800 rpm) |
Capacity for Liquids
| Spec | Value |
|---|---|
| Fuel | Diesel Diesel |
Dimensions
| Spec | Value |
|---|---|
| Length | 206 in 5228 mm |
| Width | 75 in 1905 mm |
| Height | 86 in 2180 mm |
| Weight | 20500 lb 9299 kg |
Standard Equipment
Air Inlet System
- Dual element air cleaner
- Service indicator
Cooling System
- Radiator package mounted (50° C)
- Coolant drain line with valve at edge of base
- Coolant level sensor
- Fan and belt guards
- Coolant level sight gauge
- Cat Extended Life Coolant
- Metal top and bottom tanks
Exhaust System
- Dry exhaust manifold
- Flange outlets
Fuel System
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
- Flex fuel lines
- Fuel cooler
Generator
- SR4B brushless
- Self excited
- Class H insulation
- Form wound
- IP23 protection
- Cat DVR 3-phase sensing with selectable volts/Hz
- 3 sensing CTs and one droop CT
- Anti-condensation space heater
Generator Attachments
- Bus bar – NEMA and IEC mechanicallug holes
- Bottom cable entry; capable of top cable entry
Controls
- ADEM A4 ECU
- EMCP 3 Control Panel
Lube System
- High efficiency oil filter
- Oil drain valves
- Fumes disposal
- Gear-type lube oil pump
- Deep sump oil pan
Mounting System
- Steel base frame (skidable)
- Anti-vibration mounts (shipped loose)
- Designed welded base for increased durability (I-beam design)
Starting/Charging System
- 24-volt starting motor
- 45-amp charging alternator
- Battery rack
- Battery disconnect switch
- Oversized batteries
General
- Paint — Caterpillar yellow except rails and radiators (gloss black)
- Flywheel and flywheel housing — SAE No. 0
Optional Equipment
Air Inlet System
- Air inlet adapters
- Precleaners
Exhaust System
- Stainless steel exhaust flex fittings
- Elbows, flanges, expanders, and Y adapter
Generator
- Permanent magnet excitation
- Oversize and premium generators
Starting/Charging System
- Jacket water heater with shutoff valves
- Battery chargers (10 amp)
Controls
- EMCP 4.2 control panel
- EMCP 4.3 control panel
- Local or remote annunciator panel
- Generator temperature monitoring and protection
- Discreet I/O module
- Load share module (optional with direct rack)