Main content
Caterpillar
C11 ACERT™ Dry Manifold Engine
Cat C11 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C11 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C11 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C11 ACERT engines, with ratings: 242-336 bkW (325-450 bhp) @ 1800-2100 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
Media
Photos
Details
Specifications
General Specifications
| Spec | Value |
|---|---|
| Maximum Rating | 450 BHP 336 bkW |
| Displacement | 681 in³ 11.15 l |
| Minimum Rating | 325 BHP 242 bkW |
| Governor and Protection | Electronic (ADEM™ A3) Electronic (ADEM™ A3) |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Flywheel and Flywheel Housing | SAE 1 or SAE 2 SAE 1 or SAE 2 |
| Flywheel Teeth | 113 (SAE 1), 138 (SAE 2) 113 (SAE 1), 138 (SAE 2) |
| Rotation from Flywheel End | Counterclockwise Counterclockwise |
| Stroke | 5.51 in 140 mm |
| Bore | 5.12 in 130 mm |
Emissions
| Spec | Value |
|---|---|
| Emissions | EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA, IMO II EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA, IMO II |
Dimensions
| Spec | Value |
|---|---|
| Length | 47.3 in 1201 mm |
| Width | 41.6 in 1057 mm |
| Height | 46.3 in 1176 mm |
| Weight | 1967 lb 892.22 kg |
Capacity for Liquids
| Spec | Value |
|---|---|
| Lube Oil System – Refill | 9 gal (US) 34 l |
Standard Equipment
Air Inlet System
- Turbocharger, mid-mounted
- Air inlet elbow 90°, 104.5 mm (4.11″ OD) hose connection
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring system — speed, temperature, pressure
- J1939 Broadcast — diagnostic and engine status
Cooling System
- Thermostats and housing
- Jacket water pump — gear-driven
- Front water pump inlet
Exhaust System
- Exhaust manifold — dry
- Front turbo exhaust
Flywheels and Flywheel Housings
- See Mandatory Options
Fuel System
- Electronic unit injector
- Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
- Fuel transfer pump — front
- Fuel priming pump — LH mid-mount
Lube System
- Crankcase breather
- Oil cooler
- Oil filter — RH
- Oil pan — front sump, 40 L capacity
- Oil filler — LH front
- Oil dipstick — LH mid-mount
- Oil pump
- Oil valve sampling — on oil filter base
Power Take-Offs
- Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
- Hydraulic pump drive — SAE A, 11 tooth
- 1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)
General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit (connectors, pins, sockets)
- Literature
Mandatory Options
- Flywheel housing or rear PTO
- Throttle position sensor
- Primary filter/water separator
Optional Equipment
Air Compressor
- Expansion chamber
- Governors
- Fittings
Air Inlet System
- Air cleaners
- Precleaners
- Turbo air inlet
- Air lines
Belt-Driven Accessories
- Refrigerant compressor and mounting
Charging System
- Charging alternators
- Alternator mountings
- Alternator guard
- Alternator accessories
Control System
- Connection
Cooling System
- Radiator — installed
- Fan drive f/u/w Caterpillar installed radiator
- Fan drive pulleys f/u/w customer-supplied radiators
- Coolant conditioner
- Water lines — pump inlet
- Fan drive mountings
- Fan height instructions
- Fan adapters for suction fans
- Fan adapters for blower fans
- Suction fans
- Blower fans
- Coolant level sensor
- Aftercooler lines
Exhaust System
- Muffler
- Flexible fitting
- Elbows
- Straight exhaust adapter
- Flange
- Pipe
- Rain cap
- Clamp
Fuel System
- Fuel lines
- Fuel cooler
- Fuel fitting — fuel return and supply connections
- Flexible fuel lines
Instrumentation
- Gauges and instrument panels
- Voltmeters
- Gauge mounting
- Ammeter
Lube System
- Oil pan
- Oil pan drain
- Oil level gauges
- Oil filter — bypass
- Oil filter — remote
- Lubricating oil
- Oil filler
- Fumes disposal
Mounting System
- Front and rear engine supports
- Structural steel base
Power Take-Offs
- Crankshaft pulleys
- Crankshaft pulley — stack-on
- Output flange
- Flywheel stub shaft
- Front stub shaft
- Hydraulic pump drive
- Hydraulic pumps — front
- Hydraulic pumps — rear
- Enclosed Clutch
- Clutch Support
Protection System
- Air shutoff
- Air shutoff switch
Starting System
- Electric starting motors — 12 Volt, 24 Volt
- Starting aids
- Battery sets — 24 Volt, dry
- Battery cable
- Battery rack
Transmission Arrangement
- Transmission cooler
Related Products
Well Service Engines
C7 ACERT™ (Water-Cooled Manifold)
C7 ACERT™ (Hazardous Location)
C9 ACERT™ (Dry Manifold)
C9 ACERT™ (Hazardous Location)
C13 ACERT™ (Dry Manifold)
C15 ACERT™ (Dry Manifold)
C18 ACERT™ (Dry Manifold)
C18 ACERT™ (T4 Final)
C27 ACERT™ (Dry Manifold)
C27 ACERT™ (Tier 4 Final)
C9.3 ACERT™ (Tier 4 Final)
C13 ACERT™ (Tier 4 Final)
C15 ACERT™ (Tier 4 FINAL)
C32 ACERT™ (Hazardous Location)
C32 ACERT™ (Water-Cooled Manifold)