Main content

Caterpillar

3516C Propulsion Engine (Tier 3)

The 3516C propulsion engine is available with a wide range of ratings that meet EPA Tier 3 and IMO II regulations without any additional aftertreatment. These engines provide efficient operation with electronic governing, cold mode start strategy, and programmable low idle to minimize fuel consumption. The 3516C engine also incorporates a closed crankcase ventilation system to lower emissions.

Media

Photos

Features

Details

Specifications

Spec Value
Power Range 2131-2675 bhp (1590-1995 bkW) 2131-2675 bhp (1590-1995 bkW)
Spec Value
Speed Range 1600 rpm 1600 rpm
Emissions EPA Tier 3, IMO II EPA Tier 3, IMO II
Aspiration TTA TTA
Bore 6.69 in 170 mm
Stroke 8.46 in 215 mm
Displacement 4765 in³ 78 l
Rotation from Flywheel End Counterclockwise Counterclockwise
Configuration Vee 16, 4-Stroke-Cycle Diesel Vee 16, 4-Stroke-Cycle Diesel
Spec Value
Dry Weight 21164 lb 9600 kg
Length 125.7 in 3192 mm
Height 87.6 in 2225 mm
Width 89.9 in 2284 mm

Standard Equipment

Air Inlet System

  • Corrosion-resistant separate circuit aftercooler core, air cleaners with service indicator, dual turbochargers, closed crankcase ventilation system

Control System

  • Dual A4 engine control modules provide engine control and monitoring, rigid wiring harness with plug and run connectors on port and starboard sides

Cooling System

  • Separate circuit auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing

Exhaust System

  • Dry gas-tight exhaust manifolds with SOLAS compliant stainless steel heat shields, dual turbochargers with water-cooled bearings and heat shields, modular pulse exhaust manifold, single exhaust outlet

Fuel System

  • Electronically controlled unit injectors, fuel filter with service indicators, fuel transfer pump, SOLAS compliant fuel connections with spill shield

Instrumentation

  • Instrument panel shipped loose with Color Marine Power Display (MPD), alarm horn, overspeed shutdown notification light, emergency stop notification light, secondary ECU “Ready” light, secondary ECU “Active” light, graphic display unit for analog or digital display of oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)

Lube System

  • Pre-lube strategy, top-mounted dual crankcase breathers, oil filter with service indicators, oil level gauge, oil filler, gear-type oil pump

Power Take-Offs

  • Accessory drives — upper RH, upper and lower LH; two-sided front housing

Protection System

  • A4 electronic control module with customer programmable engine derate strategies, engine alarms and diagnostics displayed on local and remote MPDs, emergency stop pushbutton, safety shutoff protection for oil pressure and water temperature, overspeed protection

General

  • Vibration damper and guard, Cat® yellow paint, two lifting eyes attach to engine block,

ISO Certification

  • Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities

Mounting System

  • Mounting rails

Optional Equipment

Air Inlet System

  • Air Cleaner Removal
  • Remote Air Inlet Adapters

Charging System

  • Battery Charger
  • Charging Alternator

Control System

  • Throttle Position Sensor
  • Throttle Synchronization

Cooling System

  • Water Level Switch Gauge
  • Coolant Level Sensors
  • Connections
  • Keel Cooling Conversions
  • Heat Exchangers
  • Auxiliary Water Pumps
  • Sea Water Pump Removal
  • Coolant Shunt Tanks
  • Air Separator
  • Marine Gear Cooling

Exhaust System

  • Exhaust Outlet
  • Flexible Fittings
  • Elbows
  • Flanges
  • Flange and Exhaust Expanders
  • Mufflers

Fuel System

  • Fuel Cooler
  • Fuel Priming Pumps
  • Flexible Fuel Lines
  • Rigid Fuel Lines
  • Primary Fuel Filter
  • Fuel level switch

Instrumentation

  • PL1000T Communication Module
  • PL1000E Communication Module
  • Customer Interface
  • Thermocouples
  • Remote Panel Display
  • Remote Cylinder Temperature Display
  • Pilot House Instrument Panels
  • Marine Gear Sensors
  • Engine Vision Display System

Lube System

  • Oil Pan
  • Oil Pan Accessories
  • Sump Pumps
  • Prelubrication Options
  • Lubricating Oil
  • Centrifugal Oil Filter

Mounting System

  • Engine Supports
  • Vibration Isolation Mountings

Power Take-Offs

  • Flexible Coupling and Guards
  • Front Housing Accessories
  • Front Housing Accessory Drives
  • Upper LH Accessory Drive
  • Upper RH Accessory Drive
  • Front Power Take Offs
  • Crankshaft Pulleys
  • Damper Guard Removals

Protection System

  • Air Inlet Shutoffs
  • Switches and Contactors
  • Explosion Relief Valve
  • Sensors

Spare Parts Kits

  • Parts Kits
  • Pump Kits
  • Fuel Transfer
  • Lube Oil

Special Appearance

  • Chrome Plated Relief Valves
  • Black Air Cleaners

Starting System

  • Starting Motors or Barring Device
  • Air Starting Motors Options
  • Starting Aids
  • Battery Sets – 24 Volt – Dry
  • Battery Rack

General

  • Tool Set
  • Caterpillar Datalink Wire

Sign up for Riggs Cat Emails

  • This field is for validation purposes and should be left unchanged.